Reconnection issue

[fox]

Well I bought the PIA for two years for $70US. Just trying it now on Ubuntu. Works easy enough and seems ok speedwise so far. But it seems to have to reconnect often. Comments?

[Jason]

Well I bought the PIA for two years for $70US. Just trying it now on Ubuntu. Works easy enough and seems ok speedwise so far. But it seems to have to reconnect often. Comments?

It definitely shouldn't be doing that. Some things to try in order:

   
• Try a different server.
• Restart the PIA client (close it and then start it again)
• Disconnect your Ethernet (or wireless) connection and then reconnect it. It will take a second for the PIA client to see the network connection again and restart.
• Try rebooting. I hate to say it but sometimes it really works.

[fox]

Now I'm having a lot of problems with PIA and I'm not impressed. If I have it running and either change the connection or it goes to sleep, I get no connection. If I turn it off, I have no connection. If I turn off and then on my internet to try to clear it, I have no connection. The only thing that works is a reboot. I haven't had this problem with an other VPN I've tried. If I can't solve this, I'm going to cancel and ask for my money back.

I put in a request for help on this to PIA. Meanwhile, I installed it on my iPad and it works well on it. I can turn it on or off without any impact on my internet connection.

[ssfc72]

I have had no problems at all, with PIA VPN. I am only running a Mint Distro and I don't use Windows.

[Jason]

It's unclear to me in your last post if you tried my suggestions - namely, (1) and (2). With (2), you might have but I'm not sure. You said that you "turn it off". Do you mean you use the client option to Disconnect or actually choose the 'Quit' option?

Here's why I'm asking you to be more specific. If you have the kill switch on, it will disable your connection when the client is disabled (i.e. not connected). I don't mean just the VPN connection - I mean that you will not be able to connect to the internet, period. This isn't a bug, it's a feature. It's to prevent applications potentially sending un-encrypted data over the internet if you lose the connection to a VPN server.

   
• Check to see if it's enabled (the kill switch). If it is, try turning it off and leaving it off for a while to see if that makes any difference.
• Also try enabling 'small packets' in settings. Sometimes this is necessary for some routers. The downside is that it can slow down your connection so don't leave it on if it doesn't help.
• Try it in Windows if you have it on the same machine to isolate the client as the issue (or a setting in the client). Even trying it on another machine will show you it's not the service - it's the client or some weird interaction in your hardware.
• If you have both wireless and ethernet on this device and you have a wired connection, make sure that wireless isn't also being used. I've seen this happen on Ubuntu where both have been activated and I'm not sure what connection that packets are going through. PIA may not know either. Disable the ethernet in that case so you're using wireless or vice-versa.
• The fact that you mention that it works fine on the iPad says to me that it probably has nothing to do with the actual VPN service and everything to do with how it's operating on your device that is running Ubuntu.

Here's two other potential ways to solve this problem with clients:

   
• If your router has the capability, set up the VPN in it.
• Install OpenVPN through the Gnome Network Manager (details here)

It helps me to help you if when you try options or let me know that you've already tried them if you refer to the numbers above.

Other than these possible solutions, I can't think of anything else off hand.

[fox]

1. Try a different server.
    - Couldn't do that; I don't have any servers connected to this computer. However, I have since installed PIA on my Android tablet and it is working OK. (Same with iPad.)

2. Restart the PIA client (close it and then start it again)
    - Tried that; no internet after restarting

3. Disconnect your Ethernet (or wireless) connection and then reconnect it. It will take a second for the PIA client to see the network connection again and restart.
    - No ethernet on this computer. When I disconnected the wireless and then reconnected it, I had no internet.

4. Try rebooting. I hate to say it but sometimes it really works.
    - That was the only option that worked.

So I followed your suggestion to disable the kill switch and enable small packets. I then restarted with PIA enabled. This gave some improvement in that your suggestion #2 above mostly works. (I get browsing and receive email, but I can't send it most of the time.) But still, if I disconnect from the PIA window, I don't get internet even if I do #3. Restarting of course turns it back on.

I'm wondering if the problem has anything to do with openVPN. I already had that installed and had added some UDP settings associated with FastestVPN (the one I was using). Should I be either uninstalling openVPN (not sure how to do that)? I suppose I could add PIA settings to openVPN, but unless I add a bunch of them, this is kind-of nullifying one of the advantages of using PIA in the first place.

The other things I'm wondering about are the PIA settings under the Network tab. Would port forwarding or allowing LAN traffic help my situation? I'm not familiar with what they do.

[Jason]

1. Try a different server.
    - Couldn't do that; I don't have any servers connected to this computer. However, I have since installed PIA on my Android tablet and it is working OK. (Same with iPad.)

I meant try a different VPN Server, you can choose what you connect to,

I'm wondering if the problem has anything to do with openVPN. I already had that installed and had added some UDP settings associated with FastestVPN (the one I was using). Should I be either uninstalling openVPN (not sure how to do that)? I suppose I could add PIA settings to openVPN, but unless I add a bunch of them, this is kind-of nullifying one of the advantages of using PIA in the first place.

YES! YES! YES! You can't have two VPNs going at the same time! You need to uninstall or disable the openVPN for the other VPN provider. This is likely your issue. It's like trying to connect to two ISPs as the time. The other VPN provider is likely stealing away control from PIA.

The other things I'm wondering about are the PIA settings under the Network tab. Would port forwarding or allowing LAN traffic help my situation? I'm not familiar with what they do.

Port forwarding is if you want your computer reachable from the internet. Allowing LAN traffic lets you connect to other devices on your local network like a wireless printer or another computer. Not every VPN server lets you do this but you can leave it on and it won't hurt anything.

But before trying anything else, disable your other VPN. Then uninstall the PIA client. This should get you back to your original non-VPN enabled network settings. Then re-install PIA. Now it should work. If it doesn't try my other suggestions in the new post I made above. They weren't numbered before but they are now.

[fox]

Thanks Jason. Regarding other servers, I could connect to others when PIA was running. But regardless of PIA server I was connected to, I still had the problem.

Regarding openVPN, the setup doesn't let you have two connections at the same time, at least as far as I can tell. The other connections I set up through openVPN were off when I was running PIA.

And there is a new development. I added a PIA connection to the openVPN connection options, and this works in every way, including allowing me to turn it on and off without loss of internet. The problem with this method is no server flexibility. The nice thing about PIA is all the servers it runs, and I can see reasons why I might want to connect to different ones at different times. But when set up through openVPN, each server has to have a different setup. I did set up a few, but that's a kludge compared to use of the PIA app to change servers. I'm hoping that PIA tech support can tell me how to fix this.

[Jason]

The openvpn option in network settings won't let you have two VPNs at the same time provided they're using the Network Manager. But if one is a client, like with PIA, it won't see the openvpn setting. That's why PIA has separate instructions for openvpn or the client setup. They are two different ways to do it but you can't do both of them at the same time, even if they're both PIA, AFAIK.

And yes, using openvpn is a bit of a pain that way. I had to do that when I was trying out fedora. There should be a list of servers you can download but you still have have to program the password (maybe login, too?) for each connection. You shouldn't have to enter the information for each server - that should be handed by the .crt file you loaded into the configuration, I believe. At least, the way I remember it, you didn't have to. I downloaded a file that I loaded into openvpn and from then on I had to enter the password for each server I wanted to use (which was then saved for next time). I don't use a lot of different servers so I just added about 6.

[fox]

So are you saying that because I have an openVPN setup with another VPN, that PIA can't work unless it's also set up the same way? PIA works much better than FastestVPN (connects faster and seems faster at opening sites), so if this was the case, I would dump FastestVPN and openVPN to work PIA through the app. I know that the problem isn't with Ubuntu 19.10 gnome per se because PIA works fine through the app on my xps.

You're right about how to set up PIA through openVPN. It's all in one file, and opening a different server is accomplished by invoking its particular gateway. I set up four PIA servers; easy enough to do. But I still have the FastestVPN gateways as options; I can choose whichever I want. I would still rather do PIA through the app.

[Jason]

So are you saying that because I have an openVPN setup with another VPN, that PIA can't work unless it's also set up the same way?

No, I just meant if you're using a the PIA client at the same time as using another a VPN setup via openvpn, it probably won't work. The client probably wouldn't know you were using FastestVPN if that was enabled at the same time. Honestly, I'd go with what is working now until the PIA support can help you. At least you know now the service works for you and so you're not under time pressure to get it completely solved. But if you're really determined to get the client working, read on:

Remove FastestVPN entirely (including any openvpn settings) and then see if the PIA client is more functional after. You may need to re-install the PIA client so it recognizes the changed settings. Do make sure that you disable the openvpn connection to try out the client. It'd probably work anyway as PIA would view it as two different connections but I wouldn't recommend it.

It sounded like you were saying you had the kill switch enabled. If it was, that changes network settings at a lower level. It basically lets PIA override your network settings so nothing can connect unless it's connected to a server. But removing the client and reinstalling it would reset your network settings back to the way it was (it won't affect any openvpn settings you have, AFAIK).

I hope I didn't just add to the confusion. I have a penchant for blather.

[Jason]

When you're changing stuff that can could wreck your network connection even though it's temporary, it's good to create a Timeshift backup. Do it before you make changes and you can easily roll them back. It's a lot easier than changing back a whole bunch of connection settings. For example, you could do it above before removing FastestVPN, uninstalling PIA and reinstalling it. That way you can fall back to your openvpn PIA if it doesn't work out.

[fox]

Thanks, Jason. I think I finally understand how openVPM is interfering with PIA when running the latter from the app. I googled "uninstall openVPM" and came up with this. It mentions that you have to disable it in systemd as well, and I suspect that this is where the problem lies. I also suspect that I didn't have the problem on my xps because openVPN wasn't installed on it.

As you noted, I have everything working right with PIA running in openVPM. The connection to the server is fast and internet speed is good. The only negatives are that it connects to a specific server instead of looking for the fastest one (which is almost always Toronto), and I have to set up any server I want to connect to manually (easy now that I know how). So I'm going to take your advice and wait to hear from PIA tech support before making any further modifications.

[Jason]

Sounds good. Let us know how it works out.

[fox]

It's now working OK. The Tech support guy indicated that having OpenVPN shouldn't affect the use of the PIA app as long as I didn't have a simultaneous OpenVPN connection. I don't know what I did, but I was fooling around with various settings in both the PIA app and OpenVPN, and now everything is working. I can open or change a PIA connection through the app, disconnect period, reconnect later. The only thing that doesn't work (or works on and off) is outgoing mail from Thunderbird; my SMTP server is Microsoft Outlook. The Tech Support guy explained that MS itself is blocking output through mail clients (as opposed to a browser connection) due to the use of spam by some PIA users. Easy fix - turn off PIA when sending mail.

Thanks anyway for your help, Jason.